Need Custom Pricing? Request a Quote!
Request a free quote for bulk orders or repairs—response in 24 hours. Or get tailored advice and a quote for your automation needs.
Get Your Free Quote!
The 6SL3210-1PE32-5UL0 is the Siemens SINAMICS G120 PM240-2 Power Module, an unfiltered three-phase AC drive power module rated 110 kW (heavy duty) / 132 kW (light duty) at 380 to 480 V AC. The PM240-2 family is the workhorse general-purpose power stage for the SINAMICS G120 modular drive system, paired with a Control Unit (CU) such as the CU240E-2, CU250S-2, or CU230P-2 to form a complete variable-frequency drive. Typical applications include pumps, fans, conveyors, mixers, and extruders. This page lists the technical data, compares it against neighboring frame sizes, and shows the matching control units stocked at Rabwellplc.
Technical Specifications
| Parameter | Value |
|---|---|
| Article number (MLFB) | 6SL3210-1PE32-5UL0 |
| Product type | SINAMICS G120 PM240-2 Power Module |
| Line voltage | 3 AC 380 to 480 V, +/-10 % |
| Line frequency | 47 to 63 Hz |
| Output power, low overload (LO) | 132 kW |
| Output power, high overload (HO) | 110 kW |
| Rated output current LO | 250 A |
| Rated output current HO | 205 A |
| Frame size | FSF |
| Filter | Unfiltered (external line filter required for EMC class) |
| Degree of protection | IP20 |
| Cooling | Internal air cooling |
| Ambient temperature (operation) | -20 to +40 degC without derating; up to +60 degC with derating |
| Compatible control units | CU240B-2, CU240E-2, CU230P-2, CU250S-2 (and DP/PN variants) |
For commissioning steps and parameter setup, see our SINAMICS G120 startup and configuration guide.
Same-Series Comparison: PM240-2 Frame FSF Neighbors (3 AC 380-480 V)
| Article No. | Frame | LO Power | HO Power | LO Current | HO Current |
|---|---|---|---|---|---|
| 6SL3210-1PE31-8UL0 | FSE | 90 kW | 75 kW | 178 A | 143 A |
| 6SL3210-1PE32-5UL0 | FSF | 132 kW | 110 kW | 250 A | 205 A |
| 6SL3210-1PE33-0UL0 | FSF | 160 kW | 132 kW | 302 A | 250 A |
Frame and current ratings step up across the FSF range, so confirm motor full-load amps and overload duty against the LO/HO columns before sizing. For higher current requirements above the FSF range, the GX-frame Power Modules are the next step.
Compatible Components
- Control Units: CU240B-2, CU240E-2 (basic and advanced), CU230P-2 (pump/fan/HVAC), CU250S-2 (vector with encoder); each in USS/MB, DP, PN, and CAN variants
- Operator panels: BOP-2 basic operator panel, IOP-2 intelligent operator panel
- Line components: external line filter for required EMC class, line reactor for harmonic mitigation
- Braking: external braking resistor for regenerative loads
- Engineering: SINAMICS Startdrive (TIA Portal) or Starter for commissioning and parameterization
- Fieldbus to PLC: PROFINET (PN), PROFIBUS DP, EtherNet/IP, Modbus RTU, depending on the chosen Control Unit
The full SINAMICS G120 portfolio is available in the drives and motion control collection.
Common Use Cases
- Centrifugal pumps and large fans in water treatment, HVAC, and process plants
- Long conveyor lines, belt feeders, and material handling systems
- Mixers, agitators, and extruders in food, beverage, and chemical plants
- Compressor and blower applications with quadratic load profiles
- Modernization of older MICROMASTER 4 and SINAMICS G110 / G130 drives in the same power band
Why Buy from Rabwellplc
Rabwellplc stocks the 6SL3210-1PE32-5UL0 PM240-2 Power Module in the US with same-day shipping on in-stock units, factory-sealed packaging, and a 12-month warranty. We also keep matching CU240E-2 and CU250S-2 control units, BOP-2/IOP-2 operator panels, and line reactors so a complete drive can ship together. Lead times, datasheets, and firmware compatibility notes are available on request.
Check Stock and Lead Time for 6SL3210-1PE32-5UL0
Frequently Asked Questions
Is the 6SL3210-1PE32-5UL0 in stock at Rabwellplc?
Live stock is shown on the product page. For multi-unit orders or critical-need timelines, contact our team for a same-day quote and reserve stock.
What warranty applies?
We offer a 12-month warranty against manufacturing defects on factory-new, unopened SINAMICS G120 power modules.
What is the lead time if the unit is not in stock?
Backordered FSF-frame power modules typically ship from our supply network in 2 to 4 weeks. Critical-need expedites are available on request.
Do I need a separate control unit and operator panel?
Yes. The PM240-2 power module is sold separately from the CU. Pair it with a CU240B-2/E-2, CU230P-2, or CU250S-2 (with the appropriate fieldbus variant), and add a BOP-2 or IOP-2 if local operator control is needed.
Do you provide the official Siemens datasheet and operating instructions?
Yes. Request the latest equipment manual and operating instructions through the product page and our team will email the official Siemens PDFs.